94810645721 Oil Cooling Hose Verify Fit For Ford Taurus F Series Check VIN Model First

Oil Cooling Hose 94810645721 | Fits Ford Taurus/GM Large-Displacement Models (Verification Required)

1. I. Potential Compatible Models & Engines (with Verification Key Points)
   1. Core Ford Compatibility Direction
   2013-2019 Ford Taurus
   • Compatible Engines:
   ◦ 4-Cylinder 2.0L EcoBoost Turbocharged (180kW power, 350N·m torque)
   ◦ 6-Cylinder 3.5L Naturally Aspirated (213kW power, 336N·m torque)
   • Reason for Compatibility: This model previously used an oil cooling hose with a similar part number (e.g., 94610645720), and 94810645721 may be an upgraded version for the same platform. Its hose structure matches the cooling system pressure (3-5bar).
   • Mandatory Verification Items: Connector type (quick-connect/clamp-type), hose length (tolerance ≤ 5cm), inner diameter (common sizes: 12mm/16mm)
   2. Core GM Compatibility Direction
   2007-2014 GM Full-Size Vehicles/Pickups (Chevrolet Suburban, GMC Sierra)
   • Compatible Engines:
   ◦ 6.0L V8 Naturally Aspirated (298kW power, 575N·m torque)
   ◦ 6.6L V8 Turbocharged Diesel (331kW power, 1234N·m torque)
   • Reason for Compatibility: The oil cooling system pressure rating of these models matches the hose parameters (withstands 3-5bar), and they require an independent hose for heat dissipation, which aligns with the product’s characteristics.
   • Mandatory Verification Items: Connector seal size, temperature resistance marking (must be ≥ 150℃)
   3. Clearly Incompatible Models
   • Small-displacement family cars (Ford Focus 1.5L, Chevrolet Cruze 1.6L): Use integrated cooling systems and do not require independent hoses.
   • New energy vehicles (Ford Mustang Mach-E, GM Volt): Lack traditional engine oil cooling systems.
   • Old compact microcars (e.g., Chevrolet Spark): Low engine power, no need for oil cooling.
   II. Core Function: The "Oil Pathway" That Protects the Engine
   Regardless of which model it fits, this hose serves as a "critical link" in the oil cooling system, directly affecting engine lifespan and performance:
   1. Temperature Control for Oil: Extend Lubrication Lifespan
   • Function: One end connects to the engine block’s oil outlet, and the other end connects to the oil cooler. It transports high-temperature oil (100-130℃) from the engine to the cooler for temperature reduction, then returns the cooled oil to the engine—stabilizing the oil within the optimal lubrication range of 80-110℃.
   • Benefit for Car Owners: When oil temperature exceeds 120℃, it thins significantly (e.g., 5W-30 oil may have a viscosity below 5cSt at high temperatures), failing to form an effective oil film to protect pistons, crankshafts, and other components. This hose can reduce wear on core parts by over 30% and extend engine lifespan.
   2. Durability & Corrosion Resistance: Less Maintenance, More Reliability
   • Material Advantages: Made of EPDM (Ethylene Propylene Diene Monomer) rubber or fluororubber composite material, it withstands long-term high temperatures of 150℃ (and short-term peak temperatures of 180℃), avoiding softening or deformation during high-load scenarios (e.g., climbing, towing). It also resists corrosion from oil, coolant, and grease to prevent hose cracking.
   • Durability: Backed by original factory craftsmanship, it can last 50,000-80,000 kilometers under normal use—1.5 times the lifespan of ordinary aftermarket hoses—reducing the hassle of frequent replacements.
   3. System Synergy: Fuel Efficiency & Fault Prevention
   • Coordinated Operation: Works with the oil pump and thermostat to dynamically adjust oil flow—during cold starts, it reduces oil flow to the cooler to speed up oil warming (shortening engine warm-up time and reducing cold-start wear); under high loads, it increases oil flow to enhance heat dissipation, preventing oil oxidation and sludge formation (which clogs oil passages and disables lubrication).
   • Indirect Benefit: Stable oil temperature reduces engine resistance, with measured 2%-3% improvement in fuel economy—especially effective for large-displacement turbocharged/diesel engines.
   III. Fitment Verification Guide: 3 Steps to Avoid Mistakes
   Worried about buying the wrong part? Follow these steps for accurate verification in 10 minutes:
   1. Official Inquiry:
   ◦ For Ford owners: Visit the Ford Parts Official Website, enter part number 94810645721 or your vehicle’s 17-digit VIN to obtain the original factory fitment report.
   ◦ For GM owners: Go to GM Parts Direct and search using your vehicle model + engine type.
   2. Physical Verification (If You Have the Old Hose):
   Measure the old hose’s ① inner diameter, ② total length, and ③ connector type (quick-connect/clamp-type). Compare with this product’s parameters (obtain from customer service)—a tolerance of ≤ 5% means it is usable.
   3. Professional Assistance:
   Provide your vehicle’s "year + model + engine type" (e.g., "2018 Ford Taurus 2.0T") to your local 4S shop or our customer service for free fitment verification.
   IV. Usage & Replacement Reminders
   1. 3 Warning Signs for Replacement:
   ◦ Cracks, bulges, or loss of elasticity (when pressed by hand) on the hose surface.
   ◦ Oil leakage at the connector (oil stains on the ground, rapid drop in oil level).
   ◦ Dashboard warning light for "high oil temperature" illuminates.
   2. Consequences of Misuse: Mismatched hoses may cause oil leakage or burst pipes—leading to warning lights at best, and engine cylinder scuffing at worst (with repair costs exceeding thousands of dollars). Never settle for an ill-fitting part!
   Purchase Assurance
   • Fitment Peace of Mind: If verified incompatible after purchase, we offer a 7-day no-questions-asked return/refund (provided the product is uninstalled and packaging is intact).
   • Technical Support: Free fitment consultation is available, and we can also help interpret VIN-based fitment information.
   • Quality Commitment: 100% compliant with original factory material standards—no additional adjustments needed after installation, ready for immediate use.
   If you’re unsure whether this part fits your vehicle, contact customer service at any time with your vehicle information, and we’ll help you verify!
   

   ---